Skip to content

HYDE at BAU 2027

11 – 15 Jan 2027Messe MünchenHall C4Stand 523
77Article 77 of 77

InsightUpdated 7 min read9 sections4 models

Importing Door Hardware into Brazil: NCM Codes, Taxes and the Siscomex Steps

To import door hardware into Brazil you need a Siscomex registration, the eight-digit NCM code of each item, a Duimp or DI on the Portal Único and the taxes paid. Locks are 8301, hinges and door closers 8302; on November 16, 2026 the TEC duty is 16% and Brazil applies 14.4% to several of these codes.

Johnson Liu

Digital Communications, Canton HylandMA Digital Media, Johns Hopkins University

HYDE 308-S panic bar for a single door: a push bar between two side cases, catalog photograph.
HYDE 308-S panic bar for a single door: a push bar between two side cases, catalog photograph.

To import door hardware into Brazil, a company needs four things in place before the container lands: a Siscomex registration (the habilitação, still called Radar), the eight-digit NCM code of every item, an import declaration filed on the Portal Único Siscomex, now increasingly the Duimp instead of the old DI, and the cash for the taxes: import duty, IPI, PIS/Cofins-Importação, ICMS, AFRMM on ocean freight and the Siscomex fee. Locks, padlocks, lock parts and keys sit in NCM heading 8301; hinges, building hardware and door closers sit in 8302.

On the date of writing, November 16, 2026, the Mercosur common external tariff (TEC) sets a 16% import duty on all of these codes, and Brazil applies 14.4% to several of them, including other locks (8301.40.00), building hardware (8302.41.00) and door closers (8302.60.00). Rates change by Camex resolution; the one that counts is the rate in force on the day the declaration is filed.

HYDE (Canton Hyland, Zhongshan, since 1998) is the door hardware factory that writes this article. We export from China and we are not a Brazilian customs broker: this piece walks through the public procedure step by step and says where each figure can be checked.

1. Siscomex registration: the Radar

Before the first clearance, the importer must be registered to operate in Siscomex. The application is made on the Portal Único Siscomex under Receita Federal Normative Instruction 1,984/2020. There are three modalities. Expressa is restricted to publicly listed corporations and their wholly owned subsidiaries, state-owned companies and mixed-capital companies. Limitada applies to an estimated financial capacity of up to US$150,000 and allows imports, in each period of six consecutive months, of up to US$50,000 or up to US$150,000, depending on the estimate. Above that, the modality is Ilimitada. The Habilita system estimates the financial capacity and sets the modality automatically.

Do the math before you place the first order: add up the imports you plan for the next six months and compare the total with your registration limit. Once the company is registered, its legal representative adds representatives in the Cadastro de Intervenientes module of the Portal Único, and the customs broker (despachante aduaneiro) can be added as one of them.

2. The NCM code of each item

The NCM has eight digits: the first six are the Harmonized System code, the same worldwide, and the last two are Mercosur's. The table lists the door hardware codes as they appear in the nomenclature in force on the Portal Único on November 16, 2026, updated by Gecex Resolution 926/2026, with the TEC duty, the duty Brazil applies and the IPI rate from the TIPI on the same date.

Scroll sideways to compare columns. Select a column heading to sort; select it three times to restore source order.

2. The NCM code of each item
8301.10.00PadlocksPadlocks16%14.4%0%
8301.40.00Other locks; boltsDoor locks: mortise, rim, tubular16%14.4%0%
8301.60.00PartsLock parts sold separately16%16%0%
8301.70.00Keys presented separatelyLoose keys, without the lock16%16%0%
8302.10.00Hinges of all kindsDoor, spring and piano hinges16%16%0%
8302.41.00Other mountings and fittings, suitable for buildingsPull handles, levers without a lock, push plates, door stops16%14.4%3.25%
8302.60.00Automatic door closersDoor closers16%14.4%6.5%

Updated 17 November 2026

7 rows · Source order

Two rules settle most cases. First: if the article locks the door, the heading is 8301; if it only fixes, carries, pulls or closes the door, it is 8302. Second: under Note 1 to Chapter 83, parts of base metal follow the heading of the article they belong to, but screws and springs of iron or steel do not count as parts and stay in headings 73.18 and 73.20. Our article Door Hardware HS Codes 2026 explains that split item by item.

The panic bar is the case where a formal ruling is worth requesting. It keeps the door shut from the outside and opens it from the inside with a push, so it can be read as a lock (8301.40.00) or as building hardware (8302.41.00). At the rates on this date the import duty is 14.4% under both, but the IPI is zero under the first and 3.25% under the second. The Receita Federal accepts written consultations on NCM classification; before you file one, search the rulings already issued, which may answer the same question.

3. Import license (LPCO) and other agencies

Administrative control of imports is coordinated by Secex under Secex Ordinance 249/2023, and according to the Receita Federal most operations are exempt from licensing. Where a license is required, under the Duimp it is requested and granted in the LPCO module of the Portal Único; under the DI it is the LI. If the license has to be issued before shipment and is granted after the bill of lading date, the importer pays a fine.

We could not confirm on an official page, on the date of writing, whether the codes in the table require an LPCO or clearance by any agency, such as Inmetro. The answer comes by NCM code from the Siscomex administrative treatment simulator, and your customs broker runs that check before shipment, not after.

4. Duimp or DI

The Duimp, Brazil's single import declaration, is replacing the DI on the Portal Único under a phased shutdown schedule set by Coana Ordinance 165/2024 and adjusted through Siscomex notices. The DI shutdown simulator tells you whether your operation must already go through the Duimp. A DI filed for an operation where the Duimp is already mandatory is canceled by customs.

5. Inspection channels and release

After filing, the declaration goes through risk management and is assigned to a channel. Under the DI there are four: green, released automatically; yellow, with a document review; red, with a document review and a physical inspection of the goods; and gray, which adds an investigation of signs of fraud. Under the Duimp there is a single channel, green, yellow or red, that combines the Receita Federal's analysis with that of the other agencies involved, and the strictest one applies. Once the inspection is complete, the goods are released.

The selection criteria include the importer's tax compliance and import history, the nature, volume and value of the import, and the characteristics of the goods. One point depends on the supplier: in the yellow channel, if the description of the goods is incomplete, the customs officer can order a physical inspection to confirm the classification or the origin. So the commercial invoice and packing list should describe each item by model, material and function, in the same words that support the chosen NCM code.

6. The taxes and the order of calculation

The calculation starts from the customs value, which the broker builds from the invoice, freight and insurance. Import duty is charged on it at the TEC rate. The IPI base is the customs value plus import duty and the exchange charges paid by the importer, at the TIPI rate. The other taxes each have their own base and rate.

Scroll sideways to compare columns. Select a column heading to sort; select it three times to restore source order.

6. The taxes and the order of calculation
Import duty (II)Customs valueTEC, with Brazil's exceptions in the annexes to Gecex Resolution 272/2021
IPICustoms value + II + exchange chargesTIPI, from the Receita Federal
PIS/Pasep-Importação and Cofins-ImportaçãoBase set by Law 10,865/2004Law 10,865/2004; your broker confirms it for your NCM code
ICMSBase set by the importer's stateThe state's ICMS regulation; ask the state tax authority (Sefaz)
AFRMMPayment for waterborne transport, the freightLaw 10,893/2004, by type of navigation; paid through the Mercante system
Siscomex feeFixed amount per declaration and per line of goodsMinisterial ordinance; due even when no tax is payable

Updated 17 November 2026

6 rows · Source order

We do not quote the PIS/Cofins-Importação, ICMS or AFRMM rates or the Siscomex fee here: they depend on the state, the type of navigation or rules that change, and the right figure is the one your broker calculates for your declaration. Brazil's consumption tax reform already shows in the Duimp: CBS and IBS are calculated item by item, with nothing collected in 2026, and the Receita Federal has announced a TIPI that applies from 2027. To budget an import for next year, ask your broker to run the numbers under the rules for the expected arrival date.

7. Who does what

The customs broker, registered as your representative, confirms the NCM code with you, checks the administrative treatment, files the Duimp, follows the channel and calculates the taxes. You are responsible for the registration, the classification and the payment. We, as the exporting factory, supply what that work needs on the product side: the exact model of each item, the six-digit Harmonized System code, drawings and a data sheet.

In the same container, a panic bar such as the 305 or the 308-S, a mortise lock case such as the LC07 and a stainless steel hinge such as the SSH011 travel under different codes, and the bar is exactly the item that calls for a ruling. None of our panic bars is certified to NBR 11785 or EN 1125 today; what changes between the two standards is covered in our article NBR 11785 vs EN 1125.

Sources

Official sources checked on November 16, 2026. NCM nomenclature in force, Portal Único Siscomex: https://portalunico.siscomex.gov.br/classif/. TEC and the rates Brazil applies, annexes to Gecex Resolution 272/2021, Camex: https://www.gov.br/mdic/pt-br/assuntos/camex/se-camex/strat/tarifas/vigentes. TIPI, Receita Federal: https://www.gov.br/receitafederal/pt-br/acesso-a-informacao/legislacao/tipi-tabela-de-incidencia-do-imposto-sobre-produtos-industrializados. Siscomex registration: https://www.gov.br/receitafederal/pt-br/assuntos/aduana-e-comercio-exterior/manuais/habilitacao/habilitacao-via-portal-habilita. Import licensing: https://www.gov.br/receitafederal/pt-br/assuntos/aduana-e-comercio-exterior/manuais/despacho-de-importacao/topicos-1/procedimentos-preliminares/licenciamento-da-importacao. Siscomex simulators: https://www.gov.br/siscomex/pt-br/sistemas-de-comercio-exterior/simuladores. DI to Duimp migration: https://www.gov.br/receitafederal/pt-br/assuntos/aduana-e-comercio-exterior/manuais/despacho-de-importacao/sistemas/duimp/migracao-da-di-para-duimp. Inspection channels: https://www.gov.br/receitafederal/pt-br/assuntos/aduana-e-comercio-exterior/manuais/despacho-de-importacao/topicos-1/despacho-de-importacao/etapas-do-despacho-aduaneiro-de-importacao/parametricao. Import duty: https://www.gov.br/receitafederal/pt-br/assuntos/orientacao-tributaria/tributos/imposto-importacao. IPI: https://www.gov.br/receitafederal/pt-br/assuntos/orientacao-tributaria/tributos/ipi. AFRMM: https://www.gov.br/receitafederal/pt-br/assuntos/orientacao-tributaria/tributos/afrmm. Siscomex fee: https://www.gov.br/receitafederal/pt-br/assuntos/orientacao-tributaria/tributos/taxa-de-utilizacao-do-siscomex. Tax reform in the Duimp: https://www.gov.br/receitafederal/pt-br/assuntos/aduana-e-comercio-exterior/manuais/despacho-de-importacao/sistemas/duimp/rtc/reforma-tributaria-do-consumo. NCM classification consultation: https://www.gov.br/pt-br/servicos/formalizar-consulta-sobre-classificacao-fiscal-de-mercadorias.

Questions this answers

What is the NCM code for a door lock in Brazil?

In the nomenclature in force on November 16, 2026, door locks are 8301.40.00 (other locks; bolts). Padlocks are 8301.10.00, lock parts 8301.60.00 and keys sold without the lock 8301.70.00.

What is the NCM code for hinges and door closers?

Hinges of all kinds are 8302.10.00 and automatic door closers are 8302.60.00. Pull handles, push plates and door stops for buildings go under 8302.41.00.

How much import duty does a door lock pay in Brazil?

On November 16, 2026 the TEC sets 16% for 8301.40.00 and Brazil applies 14.4%; the IPI rate in the TIPI is zero. Check the rate in force on the day the declaration is filed.

Does door hardware need an LPCO import license or Inmetro?

Most imports into Brazil are exempt from licensing, but the requirement is set by NCM code. We could not confirm these codes on an official page; the Siscomex administrative treatment simulator answers it, and your broker checks before shipment.

Should I file a Duimp or a DI?

The Duimp is replacing the DI under a schedule set by Coana Ordinance 165/2024. The DI shutdown simulator on the Siscomex site says whether your operation must already use the Duimp; a DI filed in that case is canceled.

Related products

Request a quote
Read nextNBR 11785 vs EN 1125: What Changes for a Panic Bar in Brazil

About Canton Hyland — Canton Hyland manufactures panic exit devices, locks and architectural door hardware for commercial and institutional projects, supplying specifiers and distributors internationally.

■ End of article. Updated .

Copyright © 1998-2026 Canton Hyland Hardware & Building Material Co., Ltd.

Export documents: HYDELAND INTERNATIONAL LIMITED (affiliated export company)