HYDE

HYDE 참가: BAU 2027

2027년 1월 11일~15일Messe München홀 C4부스 523

Canton 제품 컬렉션

플로어 스프링과 피벗

피벗으로 다는 목재문, 금속문, 프레임 없는 유리문용 플로어 스프링, 상부 피벗, 오버헤드 도어 클로저, 유압 경첩입니다.

28 플로어 스프링과 피벗 — full model index

구매자가 플로어 스프링과 피벗 사양을 정하는 방법

A floor spring manufacturer in China supplying concealed floor springs, adjustable top pivots and glass top patch fittings for pivot-hung timber, metal and frameless glass doors. Buyers select by leaf weight and door width, then add the matching top pivot and, on glass, the patch. 28 models, made in our own plant, for wholesale and project supply.

Which parts do I need for one pivot-hung door?

Three, and they are ordered together: the floor spring that carries and closes the leaf, the top pivot that holds its head, and — on frameless glass only — the top patch the pivot clamps to. Each patch record names the spring it pairs with. A spring ordered without its pivot is the commonest way this set arrives incomplete, and the parts are not interchangeable between models.

How do I choose by door weight?

Every spring publishes its capacity per variant — 60kg / 100kg, 100kg / 150kg, 200kg / 300kg, 80kg / 120kg — and a model number ending in the figure is that variant. Pick the band above your leaf weight, not the one it just fits: glass is heavier than it looks, and a spring at its limit closes slowly and wears early. Confirm the door width on the record as well, because a wide light leaf can exceed a spring the weight alone would have passed.

Is there hold-open, and can the closing speed be set?

Each record states its maximum opening angle and whether 90° hold-open is offered; the two-stage valve sets closing and latching speed separately. Hold-open must not be specified on a fire door, which has to close every time. The closing-force figures are force bands, not a certification — test reports are published per model on the certificates page, and a model without one is not described as rated.

What has to be right in the floor before the spring arrives?

The cut-out. Each record gives the size of the hole the cement case sits in, and it is set in the slab before the floor finish goes down — a spring is the one item on this list that cannot be adjusted on site afterwards. Take the cut-out from the record for the exact model you ordered, not from a similar one, and check the spindle height against your finished floor level.

견적을 받으려면 무엇을 보내야 합니까?

모델 번호나 도면, 마감, 모델별 수량, 도착항을 알려 주십시오. 최소 주문 수량과 납기는 품목별로 확정합니다. 대부분의 모델은 300–5,000개 사이이며, 생산 납기는 주문 확정 후 30일부터입니다. 본 생산 주문 전에 샘플을 받아 보실 수 있습니다.

이 제품군의 모델 비교

모델 간에 서로 다른 사양 항목을 나란히 보여 드립니다. 빈칸은 해당 모델의 수치를 아직 공개하지 않았다는 뜻입니다.

모델VariantsMax door width (spindle to edge)최대 문 무게최대 개방 각도Closing force
D-1031D-1031.60 / D-1031.100≤750mm / ≤1000mm60kg / 100kg125°EN3 / EN4
D-1032D-1032.60 / D-1032.100≤800mm / ≤1100mm60kg / 100kg125°EN3 / EN4
D-1033D-1033.60 / D-1033.100≤800mm / ≤1100mm60kg / 100kg125°EN3 / EN4
D-1051D-1051.120 / D-1051.150≤1100mm / ≤1200mm120kg / 150kg125°EN4 / EN5
D-1067D-1067.200 / D-1067.300≤1350mm / ≤1500mm200kg / 300kg125°EN6 / EN7
D-1068D-1068.200 / D-1068.300≤1350mm / ≤1500mm200kg / 300kg125°EN6 / EN7
D-5061D-5061.50 / D-5061.80≤700mm / ≤900mm50kg / 80kg125°EN2 / EN3
D-5062D-5062.60 / D-5062.100≤800mm / ≤1000mm60kg / 100kg125°EN3 / EN4
D-5063D-5063.100 / D-5063.150≤1000mm / ≤1200mm100kg / 150kg125°EN4 / EN5
DZ-2031DZ-2031.150 / DZ-2031.200≤800mm / ≤900mm150kg / 200kg360°EN3 / EN4
DZ-2039DZ-2039.300 / DZ-2039.400≤1250mm / ≤1350mm300kg / 400kg360°EN5 / EN6
DZ-2086DZ-2086.60 / DZ-2086.100≤650mm / ≤750mm60kg / 100kg360°EN3 / EN4
DZ-2087DZ-2087.150 / DZ-2087.200≤850mm / ≤1000mm150kg / 200kg360°EN4 / EN5
D-3001D-3001.400 / D-3001.600≤1200mm / ≤1350mm400kg / 600kg360°—
D-3002D-3002.300 / D-3002.500≤1350mm / ≤1500mm300kg / 500kg125°—
D-3012D-3012.100 / D-3012.150≤750mm / ≤900mm100kg / 150kg360°—
D-3013D-3013.80 / D-3013.120≤900mm / ≤1100mm80kg / 120kg125°—
D-3015D-3015.100 / D-3015.150≤600mm / ≤800mm100kg / 150kg360°—
D-3016D-3016.80 / D-3016.120≤800mm / ≤1000mm80kg / 120kg125°—
전체 비교 페이지 열기

플로어 스프링과 피벗 선택 가이드

이 제품군의 공개 모델 28개가 명시한 값을 각 모델의 사양표에서 집계했습니다.

사양공개된 값(모델 수)
90° hold-openYes (19)28개 모델 중 9개는 아직 이 값을 명시하지 않습니다.
Double actionYes (19)28개 모델 중 9개는 아직 이 값을 명시하지 않습니다.
최대 문 무게60kg / 100kg (5), 100kg / 150kg (3), 150kg / 200kg (2), 200kg / 300kg (2), 기타 6개28개 모델 중 9개는 아직 이 값을 명시하지 않습니다.

주문 전 확인 사항

플로어 스프링과 피벗 관련 질문

Canton Hyland가 공개한 플로어 스프링과 피벗 모델은 몇 개입니까?
공개 모델은 28개이며 3개 유형으로 나뉩니다: 플로어 스프링, 상부 피벗, 유리문 상부 패치. 모든 모델에 당사가 확인한 사양을 담은 개별 페이지가 있습니다.
Canton Hyland 플로어 스프링과 피벗에는 어떤 90° hold-open 옵션이 있습니까?
공개 모델 수 기준: Yes (19). 28개 모델 중 9개는 아직 이 값을 명시하지 않습니다. 주문 전에 수출팀에 문의하십시오.
Canton Hyland 플로어 스프링과 피벗에는 어떤 double action 옵션이 있습니까?
공개 모델 수 기준: Yes (19). 28개 모델 중 9개는 아직 이 값을 명시하지 않습니다. 주문 전에 수출팀에 문의하십시오.
Canton Hyland 플로어 스프링과 피벗에는 어떤 최대 문 무게 옵션이 있습니까?
공개 모델 수 기준: 60kg / 100kg (5), 100kg / 150kg (3), 150kg / 200kg (2), 200kg / 300kg (2), 기타 6개. 28개 모델 중 9개는 아직 이 값을 명시하지 않습니다. 주문 전에 수출팀에 문의하십시오.